2025 PRODUCT GUIDE-INTERACTIVE - Flipbook - Page 149
CORROSION TESTING
We can offer standard neutral salt spray testing as well as custom
cyclic test methods to suit your requirements. We have 2 state of
the art chambers with 450 litre and 2000 litre capacities capable of
holding most samples no matter how large and which comply with
various automotive manufacturers’ bespoke testing standards for
neutral salt spray, cyclic and humidity testing.
MECHANICAL TESTING
Tensile testing:
Tensile testing is measuring the amount of force resisted by a material when that force is applied uniaxially in the tension plane. Our
3 universal testing machines are capable of performing tensile tests
and have capacities of 10kN, 100kN and 250kN.
Shear testing:
Shear testing is measuring the amount of force resisted by a material or component when that force is applied uniaxially through the
sectional plane.
Torque testing:
Torque testing is measuring the amount of force applied around the
rotational axis of an object.
HARDNESS TESTING
Hardness testing is measuring the resistance to deformation of a
material when a force is applied to the surface of the material.
Our Vickers microhardness tester allows us to test from 0.3kg to
2.0kg on mounted or non-mounted samples.
ULTRA VIOLET AND VISIBLE (LIGHT)
SPECTROMETRY (UV-VIS)NC
UV-VIS absorption spectroscopy is the measurement of the attenuation of a
beam of light after it passes through or reflects from a sample surface.
149
CARBON
STEEL TEK®
RANGE
BI-METAL TEK
RANGE
®
INSULATION
FIXINGS
STRESS
PLATES/
WASHERS
MASONRY
SCREWS
& ANCHORS
DRYWALL
SCREWS
WOODMASTER
RANGE
®
ACCESSORIES
SUPPLEMENTARY
149
INFORMATION
