2025 PRODUCT GUIDE-INTERACTIVE - Flipbook - Page 23
EUROPEAN TECHNICAL
ASSESSMENT
Coming soon
SuperTEK®
7
Hex Head TEK® 7
2002/95/C
sales@evofas.com
Designed For -
Fixing steel to steel.
Head Style -
5/16” hexagonal male socket
Drill point -
SuperTEK® 7
Thread Form -
24 TPI (w/ V-fluting)
Washer -
16mm Ø EPDM
sealing washer(Were noted below)
Shank Material -
Carbon Steel
Material Grade -
AISI C1022 carbon steel
(hardened ≥ 55HRC)
Coating -
EvoShield® 1000
Recommended drill
speed -
≥ 750 ≤ 1,500 RPM
(non-impacting only)
www.evofas.com
KEY POINTS
•
This variant is especially suited to fixing brick ties, components, bracketry and
secondary frame elements/ sections to primary and secondary steel framing
where a weather sealing washer is not required. Longer available lengths are
particularly suited to fixing through twin-walled structural sections such as
Square (SHS) or Rectangular (RHS) Hollow Box Sections or Parallel Flange
Channels (PFC).
•
Composite panel variant suitable for fixing 75mm to 100mm thick composite
insulation panels as well as retention of brick-tie channels to primary and
secondary steel frames.
•
5/16” (8.0mm AF) hexagonal (male) socket head allows rapid installation
using standard non-impacting screwdrivers and non-impact drive bits.
•
FOR 4.0mm - 18.0mm STEEL
PRODUCT RANGE/ USABILITY DATA
CODE
SIZE/NOM.LGTH
(mm
BOX
TSBW5.5-50-7
5.5 x 50
100
TSHW5.5-50-7
5.5 x 50
TSHW5.5-75-7
WASHER
CARTON
NOM.
DIA. (mm)
THREAD LGTH.
(mm)
DRILL CAP. (mm)
1,400
5.5
FULL
4.0 -18.0
100
1,400
5.5
FULL
4.0 -18.0
5.5 x 75
100
1,400
5.5
FULL
4.0 -18.0
TSHW5.5-100-7
5.5 x 100
100
1,400
5.5
FULL
4.0 -18.0
TSHW5.5-125-7
5.5 X 125
100
1,000
5.5
50
4.0 -18.0
TSHW5.5-150-7
5.5 x 150
100
1,000
5.5
50
4.0 -18.0
1,200
5.5
50
4.0 -18.0
TSBWHT5.5-150-7
5.5 x 150
100
23
CARBON
STEEL TEK®
RANGE
BI-METAL TEK® INSULATION
RANGE
FIXINGS
STRESS
PLATES/
WASHERS
MASONRY
SCREWS
& ANCHORS
DRYWALL
SCREWS
WOODMASTER®
RANGE
ACCESSORIES
SUPPLEMENTARY
INFORMATION
